Land Pride 700-109P Utility Vehicle User Manual


 
RevisionCommentsPart DescriptionPart No.Ref.
Drawing Image Numberdwg21232
FRONT DIFFERENTIAL W/ELE CLTCH826-398C
#1 Kit includes #2 to #8 & 42OUTPUT COVER PLATE ASSEMBLY6203-12-1001.
Sold with #1 kitMATE-N-LOK- HOUSING2.
Sold with #1 kitMATE-N-LOK PIN3.
Sold with #1 kitGROMMET, OUTPUT COVER4.
Sold with #1 kitCOVER PLATE, OUTPUT-MACHINED5.
Sold with #1 kit & #39 kitO-RING, OUTPUT-164S (SQ. RING)6.
Sold with #1 kitCOIL POCKET INSERT7.
Sold with #1 kitCOIL W/PRESS FIT BOBBIN8.
ARMATURE PLATE6203-59-032-B9.
SHIM .05 THICK BRASS, HALF HARD6203-26-020-A10.
6008-C3 DEEP GROOVE ROLLER BEARING
1215-02-038-T11.
#12 Kit includes #13 to #16CLUTCH ASSEMBLY6203-01-16612.
Sold separately & with #12 kit6015-C3 DEEP GROVE ROLLER BALL
BEARING
1215-02-141-T13.
Sold separately & with #12 kitCLTH.HSG./RNG GR., 42T 6.75DP6203-13-124-D14.
Sold separately & with #12 kitROLL KIT6203-29-010-015.
#16 Kit includes #17 & #18ROLL CAGE ASSEMBLY6203-20-07216.
Sold separately & with #16 kitROLL CAGE, PLASTIC-MACHINED17.
Sold separately & with #16 kitSPRING KIT, H-CLIP .008 THK6203-35-024-018.
#19 Kit includes #20 to #21RACE/OUTPUT HUB ASSEMBLY6203-27-017-B19.
Sold with #19 kitRACE/OUTPUT HUB, FEMALE20.
Sold with #19 kitPAP0806 PERMIGLIDE BUSHING21.
Sold separately & with #19 kitTC815 NEEDLE ROLLER THRUST BEARING1242-00-009-T22.
Sold separately & with #19 kit1/2 DIA X 1 LG. DOWEL PIN0430-01-002-T23.
Sold with #19 kitRACE/OUTPUT HUB, MALE24.
#25 Kit includes #26 to #32GEARCASE ASSEMBLY6203-13-16525.
Sold with #25 kitMB1615 DU BUSHING26.
Sold with #25 kitLABEL, BAR CODE27.
Sold with #25 kitTUBE, VENT 1/2 HOSE28.
Torque item #29 (PLUG OIL
FILL 3/4-16 HOLLOW HD) 10
ft*lbs.
Sold separately & with #25 kitPLUG OIL FILL 3/4-16 HOLLOW HEAD0518-03-009-T29.
Sold with #25 kitGEARCASE, LH-MACHINED30.
Sold with #25 kitBUSHNG, SELF LUBRICATING 80X85X2031.
#32 Kit includes #33 & #34DRAIN PLUG ASSEMBLY6203-95-001-032.
Sold with #32 kitWASHER, .625X.06, NYLON 6/633.
W/MAG. TIPSold with #32 kit; Torque
item #34 (PLG,OIL DRAIN,3/8-16HH
FLNGE W/M) 9 ft*lbs.
PLUG, OIL DRAIN, 3/8-16HH FLANGE34.
Torque item #35 (5/16" x 1" Hex
Head Bolts) 17 ft*lbs.
BOLT KIT6203-93-001-035.
SHAFT PNION 11T3.75DP, MACHINED6203-47-024-B36.
ROLLER BALL BEARING6306-03-C3 DP GROOVE1215-02-154-T37.
COVER PLATE, INPUT-MACHINED6203-12-064-B38.
#39 Kit includes #6 & #40 to #42MINOR REPAIR KIT6203-56-001-039.
Sold with #39 kit0-RING, INPUT, 148S40.
Sold with #1 kit & #39 kit25X47X8 TRIPLE LIP OIL SEAL41.
Sold with #39 kit40X52X7TC OIL SEAL, OUTPUT42.
*
*
IMPORTANT NOTES:
1. Torque 3/4" oil drain plug (Item #29) to 10 ft.
lbs.
2. Torque 3/8" oil drain plut (Item #34) to 9 ft.
lbs.
02/19/09 4210ST & 4410ST Utility Vehicles Treker 700-109P 45
Table of Contents Part Number Index
Section 6: Drive Train Land Pride
TREKER 10 SERIES
Front Differential Components
Applies to 4410ST