Filter
Top Products
2
Manual No. 330-094M 8/20/07
Land Pride
Shredder Assembly Instructions
■
Left Wing Shredder Assembly
Refer to Figure 3:
1. Attach left wing shredder assembly (#3) to gearbox
output shaft (C) with existing washer (D) and slotted
hex nut (E). Torqued slotted nut to 550 ft-lbs.
2. Install cotter pin (F) in the slotted nut with legs
securely bent around the nut.
CCW Rotation
Right Wing Shredder Blades - 60" Cut
Figure 1
CW Rotation
Left Wing Shredder Blades - 60" cut
Figure 3
CCW Rotation
Center Deck Shredder Blades - 72" Cut
Figure 2
25602
Right Wing Shredder Assembly
Refer to Figure 1:
1. Attach right wing shredder assembly (#1) to gearbox
output shaft (A) with existing washer (D) and slotted
hex nut (E). Torqued slotted nut to 550 ft-lbs.
2. Install cotter pin (F) in the slotted nut with legs
securely bent around the nut.
Center Deck Shredder Assembly
Refer to Figure 2:
1. Attach Center Deck shredder assembly (#2) to
gearbox output shaft (B) with existing washer (D) and
slotted hex nut (E). Torqued slotted nut to 550 ft-lbs.
2. Install cotter pin (F) in the slotted nut with legs
securely bent around the nut.