Land Pride 55 Series Lawn Mower User Manual


 
1
© Copyright 2007 Printed
Before You Start
Your Shredder Kit is exclusively designed for your Land
Pride 55 and 65 Series Rotary Cutter. Please read these
installation instructions and your Rotary Cutter
Operator’s Manual thoroughly before beginning.
Especially read information relating to safety concerns.
Also included in the Operator’s Manual is important
information on operation, adjustment, troubleshooting,
and maintenance for this attachment (some manual
sections do not apply to all accessories).
A separate Rotary Cutter Parts Manual is available free
of charge at www.landpride.com or can be purchased
from your nearest Land Pride dealer. Have the model
and serial numbers of your cutter handy when placing an
order.
Manual Part Numbers:
Operator’s Manual . . . . . . . . . . . . . . . . . 318-721M
Parts Manual . . . . . . . . . . . . . . . . . . . . . 318-721P
General Information
These assembly instructions apply to the Shredder Kit
listed below:
330-094A RC(M)5515 & RC(M)6515 SHREDDER KIT
When you see this symbol, the subsequent
instructions and warnings are serious - follow
without exception. Your life and the lives of
others depend on it!
!
IMPORTANT: Before you begin, read these
instructions and check to be sure all parts and tools
are accounted for. Please retain these installation
instructions for future reference and parts ordering
information.
NOTE: Land Pride recommends safety glasses and
work gloves be worn while working on the Rotary
Cutter.
Further Assistance
Your dealer wants you to be satisfied with your new
Shredder Kit. If for any reason you do not understand any
part of this manual or are not satisfied with the service
received, the following actions are suggested:
1. Discuss the matter with your dealership service
manager making sure he is aware of any problems
you may have and that he has had the opportunity to
assist you.
2. If you are still not satisfied, seek out the owner or
general manager of the dealership, explain the
problem and request assistance.
3. For further assistance write to:
Land Pride Service Department
1525 East North Street
P.O. Box 5060
Salina, Ks. 67402-5060
E-mail address
lpservicedept@landpride.com
Safety Information
!
WARNING
Never work under equipment supported by hydraulics.
Hydraulics can drop equipment if controls are actuated or if
hydraulic lines burst. Either situation can drop the cutter
instantly even when power to the hydraulics is shut off.
!
DANGER
Always disconnect main driveline from tractor PTO before
servicing the cutter deck. Cutter can be engaged if tractor is
started resulting in damage to the cutter, bodily injury and/or
death.
Shredder Assembly Instructions
A detailed listing of parts for this accessory kit is provided
on page 4. Use the list as a checklist to inventory parts
received. Please contact your local Land Pride dealer for
any missing hardware.
Refer to Figure 2 on page 2:
1. Remove all three existing blade carrier assemblies
from the gearbox output shafts. Keep flat washers
(D), slotted hex nuts (E) and cotter pins (F) for reuse.
IMPORTANT: Read “Safety Information” above
before installing the shredder blades.
For RC(M)5515 & RC(M)6515 Rotary Cutters
Shredder Kit
8/20/07
Manual No. 330-094M