Filter
Top Products
9
HOW TO INSTALL AND REPLACE THE BATTERIES INTO THE THERMO-
HYGRO TRANSMITTER
The outdoor Thermo-hygro transmitter works with 2 x AA IEC LR6,
1.5V batteries. To install and replace the batteries, please follow
the steps below:
1. Uninstall the air flow cover of the transmitter.
2. Remove the battery compartment cover.
3. Insert the batteries, observing the correct polarity (see the
marking in the battery compartment).
4. Replace the battery cover and the air flow cover onto the unit.
Note:
When changing batteries in any of the units, all units need to be reset by following the
setting up procedures. This is because a random security code is assigned by the thermo-
hygro sensor at start-up and this code must be received and stored by the Weather Center
in the first several minutes of power being supplied to it.
HOW TO INSTALL AND REPLACE THE BATTERIES INTO THE WEATHER
STATION
The Weather Station works with 3 x
AA, IEC LR6 1.5V batteries. When
the batteries need to be replaced,
the low battery symbol will appear
on the LCD.
To install and replace the batteries,
please follow the steps below:
1. Remove the battery
compartment cover.
2. Insert the batteries observing
the correct polarity (see the
marking in the battery
compartment).
3. Replace the battery cover.
10
HOW TO INSTALL AND REPLACE BATTERIES INTO THE RAIN SENSOR
(OPTIONAL; SOLD SEPERATELY)
1. Unlock the main cover from the rain sensor base and remove the cover.
2. Remove the battery cover at the top of the rain sensor.
3. Insert 2 x AAA IEC LR3 1.5V batteries into the battery compartment, observing the
correct polarity.
4. Replace the battery cover and the main cover on the unit.
Note:
When changing batteries in any of the units, all units need to be reset by following the
setting up procedures. This is because a random security code is assigned by the
transmitter and rain sensor (optional) at start-up and this code must be received and
stored by the Weather Station in the first 90 seconds of power being supplied to it.
BATTERY CHANGE:
It is recommended to replace the batteries in all units regularly to ensure optimum
accuracy of these units. (For battery life information, see the Specifications section)
Please participate in the preservation of the environment. Return used
batteries to an authorised depot.
Note:
The stored History record is lost when a battery change is done on the weather station.
Figure 1
Figure 2
Figure 3