TION OF TONGUE ASSEMBLY C. INSTALLA
1. he tongue can be installed either on the left or right carrier arm assembly depending on how
the tow-behind mo ivot on the chosen
arrier arm assembly with the 1/2” x 3-1/2” hex head bolt, lock washer, and nut provided.
2. Install the tongue into the hitch pivot and secure by placing the provided 5/16” wire lock pins on
each side of the hitch pivot.
Figure 5: Assembly of the Tongue and Hitch Pivot
T
wer will be towed. See figure 5. Secure the hitch p
c
Note: To help prevent any unwanted pin removal caused by oncoming debris install the 5/16”
wire lock pins with the wire lock section back from the direction of travel. See Figure 6.
Hitch Pivot – Attach to
Either Left or Right
Carrier Arm Assy.
Tongue
Carrier Arm
Assy.
Direct Behind Position Offset Position
7