Filter
Top Products
5
3125/3130ST 006054 R032504
Kuhn Knight, Inc.
1501 West 7th Ave., Brodhead, WI 53520
701 Cherry Ave., Greeley, CO 80632
Front End and Subframe Parts
REF PART NO QTY DESCRIPTION
1 102-550 1 Upper Shield; Mtg Hrd: 3/8" x 1 1/4" B, Fw, Lw & Nut (2 ea)
2 136-867 1 Lower Shield; Mtg Hrd: 1/4” x 3/4” B, Lw, N (4 ea) Fw (8 ea)
3 170-627 1 Key, SQ 5/16” x 1 3/4”
GREASE LINES
4 170-865 1* Grease Zerk 1/8” NPT
5 172-024 1* Coupling
6 172-822 2* Compression Fitting
7 180-630** Grease Line Tubing
18" Required for upper auger bearing
16" Required for lower auger bearing
23" Required for front reel bearing
21" Required for inner input shaft bearing
21" Required for outer input shaft bearing
8 172-823*** 1* Adapter Fitting; 1/4” SAE x 1/8” NPTF
9 170-244 1* Flat Washer 3/8"
10 136-835 2 Safety Shield; Front Drive; Mtg Hrd: 3/8" NC Wing Nut (171-929) & Fw (8ea)
11 171-935** 10’6” Front Shield Gasket; 3/8" x 3/4" Closed Cell Foam (QTY PER SHIELD)
12 136-837 1 Sheet, Center Panel; Mtg Hrd: 3/8” x 7/8” Bolt, Fw, Lw, N
13 134-900 1 Hose Hanger (weld on)
14 172-138* 4 Weigh Bar; 2 1/8" Dia (J-star-black finish)
173-230* 4 Weigh Bar; 2 1/8" Dia (Weigh-tronix-white finish)
15 101-742 4 Weigh Bar Mount Spool; Mtg Hrd To Unit: 5/8" x 1 3/4" Bolt, Fw & Ln (2 ea)
16 101-771 2 Weigh Bar Mount
17 171-819 2 Skid Rail; 3” x 4” x 168” (3125); Mtg Hrd: 3/8” x 4 1/2” C-Bolt, Fw, Nut
134-890 2 Skid Rail; 3” x 4” x 191 3/4” (3130); Mtg Hrd: 3/8” x 4 1/2” C-Bolt, Fw, Nut
18 101-909 2 6” Riser (for units without minus scale); Mtg Hrd; 5/8" x 1 3/4" Bolt, Fw & Ln (4 ea)
Single motor only
19 101-788 2 Jacking Bolt; Mtg Hrd: Nut, Fw (2 ea)
20 101-880 2 Motor Rail Assy; Mtg Hrd: Rail to frame: 1/2" x 1 1/2" B, Fw & Lw, Nut (2 ea)
Rail to motor: 3/8” x 1 1/2" B, Heavy Fw, Lw, (2 ea) Fw, Nut (4 ea)
21 175-308 1 Pulley 4 Groove 4.55 OD
22 172-178 1 Bushing, 1 3/8 ID (Standard on 3125 single motor only)
172-179 1 Bushing, 1 5/8 ID (Standard on 3130 single motor only)
23 172-161 4 Belt; Bx78-MBL
24 172-266 1 Pulley 4 Groove 20.35 OD
25 172-180 1 Bushing, 1 3/8 ID
Double motor only
19 101-788 4 Jacking Bolt; Mtg Hrd: Nut, Fw (2 ea)
20 101-880 4 Motor Rail Assy; Mtg Hrd: Rail to frame: 1/2" x 1 1/2" B, Fw & Lw, Nut (2 ea)
Rail to motor: 3/8” x 1 1/2" B, Heavy Fw, Lw, (2 ea) Fw, Nut (4 ea)
21 175-309 2 Pulley 3 Groove 4.55 OD
22 171-954 2 Bushing, 1 3/8 ID (Standard on all double motor)
23 172-161 4 Belt; Bx78-MBL
24 172-266 1 Pulley 4 Groove 20.35 OD
25 172-180 1 Bushing, 1 3/8 ID
Motor bushings available to fit 172-176 (motor) pulley
171-144 A/R Bushing, 1 7/8 ID
* Quantity required to complete 1 grease line assy
** Sold by the linear foot.
*** Not required on all installations
***** All (4) weigh bars must be the same type to properly function and will work with either the J-Star or Weigh-tronix indicator.