- 3 -
Setting up the illuminated Figure
Take the Illuminated Figure from its >
packaging.
Remove all transportation fasteners and >
tapes/foils.
Place the Illuminated Figure on a >
suitable surface.
Carefully pull the two wire elements apart, >
on the Christmas tree figure (KH4222)
and the Snowman figure (KH4220),
so that the figures can stand alone.
If necessary, secure the illuminated figures >
to the ground with the supplied ground
spikes.
Connect the Illuminated Figure with >
a correctly installed 230 V domestic
power wall socket.
When you wish to turn off the illumina- >
tion function of the Illuminated Figure,
remove the plug from the wall socket.
During the periods in which the Illumi- >
nated Figure will not be in use, please
store it in its packaging.
Cleaning and Care
Risk of potentially fatal
electrical shock:
First remove the plug from the power •
socket.
NEVER submerse the Illuminated Figure •
in water or other fluids!
Do not allow any liquids to permeate •
into the Illuminated Figure.
Before you start cleaning it, allow the Illu- >
minated Figure to cool down if need be.
Cleaning the Rope Light:
Clean the rope light with a lightly mois- >
tened cloth. NEVER use petrol, solvents
or detergents that can damage plastics!
Maintenance
The illuminated figure contains no parts •
that can be serviced by the consumer.
Disposal
Do not dispose of the device in
your normal domestic waste.
This device is subject to the European
Guidelines 2002/96/EC.
Dispose of the appliance through an •
approved disposal centre or at your
community waste facility.
Observe the currently applicable regu-•
lations. In case of doubt contact your
disposal facility.
Dispose of all packaging materials
in an environmentally friendly
manner.
IB_KH4218_23_32998_LB6.indd 3IB_KH4218_23_32998_LB6.indd 3 18.06.2009 8:37:51 Uhr18.06.2009 8:37:51 Uhr