Filter
Top Products
42 Section 3 VSC Controller Operation TP-6843 1/13
3.17 Programmable Interface
Module (PIM) Status Menu
Note: The PIM status menu appears if a
programmable interface module (PIM) or a
communications kit interface board (IB) is
connected.
The PIM status menu displays the status of inputs and
outputs connected to the programmable interface
module (PIM) or communications kit interface board
(IB). See Figure 3-26. This is a status display menu
only. Input and output settings cannot be changed
from the VSC controller’s user interface.
A personal computer running Kohler
®
SiteTech
™
software is required to change the input and output
settings for the PIM. Contact an authorized distributor
or dealer for service.
The Kohler
®
OnCue
®
Management System can be
used to turn the PIM outputs on and off. See the
OnCue
®
Software Operation Manual for instructions.
The input and output settings for the communications
kit interface board are factory set and locked.
Figure 3-26
Figure 3-26 Programmable Interface Module (PIM) Status Menu
*
* PIM Status displays the interface board status if the optional communications
kit with factory-installed interface board is installed.
PIM
Status:
P I M 1 -- -- >
<---- Return
Input 1
In/Active
Output 1:
In/Active
Input 2
In/Active
Output 2:
In/Active
Output 3:
In/Active
Output 4:
In/Active
Output 5:
In/Active
Output 6:
In/Active
<---- Return