Filter
Top Products
10
TO EMPTY GRASS CATCH ER
1. Lift up on grass catcher using the
frame han dle.
2. Remove grass catcher with clip pings
from under lawn mower han dle.
3. Empty clippings from bag.
NOTE: Do not drag the bag when emp-
ty ing; it will cause unnecessary wear.
TO CONVERT MOWER
Your lawn mower was shipped ready to be
used as a mulcher. To convert to bagging
or discharging:
REAR BAGGING
• Open rear door and remove mulcher
plug. Store mulcher plug in a safe
place.
• You can now install the grass catcher or
optional clipping defl ector.
• To convert to mulching or discharging
operation, install mulcher plug into rear
discharge opening of mower.
Mulcher plug
SIMPLE STEPS TO REMEMBER WHEN
CONVERTING YOUR LAWN MOWER
FOR MULCHING -
1. Rear mulcher plug installed.
2. Mulcher door closed.
FOR REAR BAGGING -
1. Rear mulcher plug removed.
2. Grass catcher installed.
3. Mulcher door closed.
FOR SIDE DISCHARGING -
1. Rear mulcher plug installed.
2. Discharge defl ector installed.
CAUTION: Do not run your lawn
mower with out mulcher plug or ap proved
grass catch er in place. Never at tempt to
op er ate the lawn mow er with the rear door
re moved or propped open.
Grass
catcher
frame
handle
SIDE DIS CHARG ING
• Mulcher plug must be installed into rear
discharge open ing of mower.
• Open mulcher door and install dis-
charge defl ector under door as shown.
• Mower is now ready for discharging
operation.
Open mulcher door
Install
discharge
defl ector
MOWER IS NOW READY FOR
DISCHARGING OPERATION
• To convert to mulching or bagging
operation, dis charge defl ector must be
removed and mulcher door closed.