Filter
Top Products
KMR 1250 B User Instructions English
47
Adjusting the sweeping
pattern
n Open the unit cover and secure it in place.
ç The sweeping pattern can be altered by turning the cen-
tral adjusting knob.
– To increase size of sweeping pattern: turn adjusting
knob counter-clockwise (towards +).
– To reduce size of sweeping pattern: turn adjusting
knob clockwise (towards –).
After any adjustments have been made, check the sweeping
pattern.
n Drive the sweeper onto a dusty surface and apply the
parking brake.
n Lower the main brush (lever set to middle position) and
allow it to brush the floor for several seconds.
n Raise the main brush and drive backwards a short di-
stance with the bulk waste flap open (first release the
parking brake).
n The width of the sweeping pattern should be 30–50 mm.
Note:
The shape of the sweeping pattern should not be trapezoi-
dal. If it is, call customer service.
(only valid for main brush roller with
”fixed setting”)