Filter
Top Products
11
4. OPERATING YOUR PRESSURE WASHER
If you have followed all the instructions so far, you are
now ready to have fun cleaning the KARCHER way!!!
Turn on the supply water and squeeze the Spray Gun lever (No.10)
until the water flows freely and removes all air locks from the hoses.
You may now attach the High Pressure Lance (No.7a) or required
accessory to the Spray Gun.
All accessories are bayonet fit, simply push in and twist
until they click into position !
Once water is flowing through the machine, you may now
switch on your Karcher Pressure Washer using the Power
Switch (No.3).
WHEN USING YOUR KARCHER PRESSURE WASHER ON
THE HIGH PRESSURE SETTING, THE RECOMMENDED
WORKING DISTANCE BETWEEN THE NOZZLE AND THE
OBJECT OR SURFACE TO BE CLEANED IS 30 CM.
IT CAN BE CLOSER IF REQUIRED FOR PATIOS OR MASONERY
It is your responsibility to check the suitability of the surface to be cleaned.
Karcher (UK) Ltd. cannot be held responsible for any damaged caused.