Filter
Top Products
4
Step 6
Turn fuel valve
on.
Step 7
Slide the throttle control to the fast position. Move
the choke lever to the “CHOKE” position (only if the engine is
cool). After starting, move the choke to “RUN”.
OPERATING INSTRUCTIONS
Step 1 Connect the high pressure hose
to the unit’s high pressure outlet.
Step 3 Connect garden
hose to the cold water
source and turn water on
completely.
Step 2 Connect garden hose to unit’s
water inlet.
Step 4 Trigger the gun
to eliminate trapped air,
wait for a steady flow of
water to emerge from the
spray nozzle.
Step 5
Turn the engine on (I).
Tools required: adjustable pliers.
3
ASSEMBLY INSTRUCTIONS
Step 1
Attach the handle to the frame of
the pressure washer. Align holes, insert bolt,
and tighten with knob.
Step 3
Attach the triple jet nozzle to the
spray wand.
Step 4
Attach the spray wand to the
trigger gun.
Step 2
Attach high pressure hose to
trigger gun.
Step 5
Check oil level. Oil level should be
to the oil filler neck. Be sure the machine is
level when checking the oil level. (Refer to the
engine’s operating manual for seasonal grades.)
Step 6
Fill gas tank with unleaded
gasoline. Do not use leaded gasoline.
Important!
Do not run the engine
with a high or low oil level as this can
cause engine damage. If you have fur-
ther questions regarding the engine,
please refer to the engine’s operating
manual included with the unit.
K8000G Manual 11/30/01 5:06 PM Page 4