Filter
Top Products
6 English
" STEP 1: Mount cover and secure
with 2 screws.
" STEP 2: Attach the handle and se-
cure with 4 screws.
" STEP 3: Attach detergent suction
tube to the detergent dosing valve.
" STEP 4: Place detergent tank into
compartment.
" STEP 5: Attach the high pressure
hose to the trigger gun.
Pull out the locking slide from the
right side of the trigger gun handle
(A), and insert the small end of the
high pressure hose into place (B).
Push the locking slide back into the
trigger gun (C) to lock the hose in po-
sition (D).
ASSEMBLY INSTRUCTIONS
A
“clic”
B
C
D