Karcher K 5.540 Pressure Washer User Manual


 
English 9
This pressure washer has been tested
by Kärcher's quality assurance team. A
small amount of water may be present
in the water inlet or outlet. This is nor-
mal and will not affect the performance
of the pressure washer.
STEP 1:
Insert the spray wand of your
choice into the trigger gun. Press in
against the spring tension and twist
into locked position.
STEP 2:
Install the supplied connector to the
unit’s water inlet.
Note: Never attach the garden
hose connector to the unit’s water
inlet!
STEP 3:
Screw the supplied garden hose
connector on to the end of your gar-
den hose. Push the garden hose
connector on to the water inlet con-
nector and make sure you hear it
click into place before proceeding.
STEP 4:
Connect garden hose to the cold
water source and turn water on
completely.
STEP 5:
Plug the Ground Fault Circuit Inter-
rupter (GFCI) into a receptacle.
Press RESET button, indicator
should be “ON”.
Press TEST button, indicator
should be “OFF”.
Press RESET button for use.
We recommend that you test the
GFCI as part of your startup proce-
dure each time you use your pres-
sure washer. To learn how to
peform this test on your unit, visit
http://www.karcherresidential.com/
gfci_test.php for detailed instruc-
tions for your type of GFCI.
OPERATING INSTRUCTIONS