Filter
Top Products
English 5
The wall mount is to be used for storing
the appliance and the charger.
Î Fix the enclosed wall mount at an
easily accessible point near to a
socket - the fastener is enclosed.
The brush roller has not yet been in-
serted in the appliance at the time of de-
livery. Please insert the brush roller
before starting the appliance.
Î Turn the casing.
Î Insert the brush roller in the side-in-
take.
Î Press in the holder of the brush roller
into the intake and check that it is sit-
ting properly.
The telescopic strut consists of 3 parts.
While assembling it, make sure that the
parts lock into each other.
Î Insert the handle on the longer strut
with turning handle.
Î Insert together the longer and short-
er struts; while assembling it, press
the locking button.
Î Insert the entire strut with the locking
button into the joint on the appliance.
Î Loosen the handle and pull out the
strut to the desired working height;
turn the handle to the correct posi-
tion and tighten using the turning
handle.
The battery has not yet been inserted in
the appliance at the time of delivery.
Please insert the battery before com-
missioning the appliance.
Î Remove the rechargeable battery
from its packing.
Î Insert the battery into the intake until
it locks.
Î Charge the battery: The battery can
be charged when it is in the appli-
ance or removed from it. Note: The
following section describes the
charging process when the battery is
in the appliance.
Î Insert the charger delivered with the
appliance into a proper socket.
START UP
Installing the wall unit
Insert the brush roller
Installing the telescopic handle
and adjusting the handle height
Inserting and charging the battery