Filter
Top Products
No tools required.
You are now ready
to operate your
Karcher 5000 G
Pressure Washer.
3
ASSEMBLY INSTRUCTIONS
Step 1
Attach the handle to the frame of
the pressure washer. Align holes, insert bolt,
and tighten with knob.
Step 2
Check oil level. Oil level should
always be between the “FULL” and “ADD”
marks on the dipstick. Be sure the machine
is level when checking the oil level. (Refer to
the engine’s operating manual for seasonal
grades.)
Step 3
Fill gas tank with unleaded
gasoline. Do not use leaded gasoline.
Important!
Do not run the engine
with a high or low oil level as this can
cause engine damage. If you have fur-
ther questions regarding the engine,
please refer to the engine’s operating
manual included with the unit.