Filter
Top Products
English 7
For more detailed information on
how to assemble this pressure
washer, please visit
www.karcherresidential.com/
assembly
A Philips Screwdriver, medium
size (not supplied)
for final assembly
Mount loose parts delivered with appli-
ance prior to start-up.
STEP 1:
Insert the wheel into the body, rotat-
ing the wheel as you push it into
place. You should hear a click when
the wheel is completely inserted.
Then push the wheel cap into place
on the wheel, press around edges
and the center of the wheel cap to
make sure it is properly seated. You
should hear another click. Do not
proceed with the assembly until the
wheels are securely installed.
STEP 2:
Place the bottom holder into the re-
cesses and push forward until it au-
dibly locks in.
Insert the top holder and push down
all the way.
STEP 3:
Press in the storage hook and lock
it into the top position.
ASSEMBLY INSTRUCTIONS
Required tools
Assembly
Install wheels and hub caps
Install the storage for hand-spray
gun
Install the storage hook for the
mains connection cable