Filter
Top Products
8 English
STEP 1:
Connect the high pressure hose to
the unit’s high pressure outlet.
STEP 2:
Insert the spray wand of your
choice into the trigger gun. Press in
against the spring tension and twist
into locked position.
STEP 3:
Install the supplied connector to the
unit’s water inlet.
STEP 4:
Screw the supplied garden hose
connector on to the end of your gar-
den hose.
STEP 5:
Push the garden hose connector on
to the water inlet connector and
make sure you hear it click into
place before proceeding.
STEP 6:
Connect garden hose to the cold
water source and turn water on
completely.
OPERATING INSTRUCTIONS