Filter
Top Products
8 English
ƽ WARNING
To avoid serious injury never point
spray nozzle at yourself, other per-
sons or animals.
Always test an inconspicuous area
before cleaning with high pressure.
This nozzle features a 0º pencil jet
which rotates 360º for maximum dirt
cutting action, effectively increasing
cleaning performance up to 50%.
This nozzle combines the cleaning
performance of a 0º pencil jet with
the surface coverage of a wide angle
nozzle.
Not recommended for soft materi-
als, siding, painted surfaces,
decks or autos.
Before cleaning any surface an in-
conspicuous area should be cleaned
to test spray pattern and distance for
maximum cleaning results.
The Vario Power Spray Wand allows
you to adjust the cleaning pressure.
To clean at maximum pressure, the
wand must be positioned to the high
pressure setting (Max).
For reduced pressure turn the wand
collar in the „Min“ direction.
To apply detergent, the wand must
be positioned to the low pressure
setting (Mix).
Detergents can only be applied at low
pressure (Min).
Î STEP 1:
Install the Vario Power Spray Wand.
Set the spray wand to the low pres-
sure setting (Mix).
Î STEP 2:
Fill the Detergent Tank with the se-
lected detergent.
Î STEP 3:
Turn on the pressure washer (I). Pull
trigger to operate unit. Liquid detergent
is drawn into the unit and mixed with
water. Apply detergent to work area. Do
not allow detergent to dry on surface.
Î STEP 4:
To rinse, move the VPS out of „Mix“
position and pull trigger to operate unit.
Î STEP 5:
Cleaning up: Always draw fresh wa-
ter through the detergent tank or si-
phon tube when done to flush any
USING THE ACCESSORIES
Dirtblaster®
Vario Power Spray Wand
WORKING WITH
DETERGENTS