Filter
Top Products
4
Step 5
Slide the throttle control to the fast
position.
Model K 2300 ABI-turn the choke lever to
the “CHOKE” position (only if engine is
cool).After starting, move the choke to
“RUN”.
Model K 1800 AB-push primer ball three
times. Wait 3 seconds between each push.
Note: in cold weather push 5 times
Step 6
Pull the starter handle. If the
engine fails to start after 3 pulls squeeze
the trigger gun to release pressure, and
repeat step 7.
OPERATING INSTRUCTIONS
Step 1 Connect the high pressure hose to
the unit’s high pressure outlet.
Step 2 Connect garden
hose to unit’s water inlet.
Step 3 Connect garden
hose to the cold water source
and turn water on completely.
Step 4 Trigger the gun to eliminate trapped air,
wait for a steady flow of water to emerge from the
spray nozzle.
NOTE: Engines controls shown may appear different.