Filter
Top Products
English 7
Î STEP 5:
Plug the Ground Fault Circuit Inter-
rupter (GFCI) into a working outlet.
We recommend that you test the GFCI as
part of your startup procedure each time you
use your pressure washer. To learn how to
peform this test on your unit, visit http://
www.karcherresidential.com/gfci_test.php
for detailed instructions for your type of GFCI.
ƽ WARNING
Do not use if above test fails.
Note: The actual appearance of the GFCI may be
different from this illustration.
Î STEP 6:
Unlock the trigger gun safety lock.
Trigger the gun to eliminate trapped
air, wait for a steady flow of water to
emerge from the spray nozzle.
Î STEP 7:
Turn on the high pressure washer (I/
ON).
The motor starts only if the trigger
of the gun is pulled and shuts off
when the trigger is released.