Filter
Top Products
OPERATING INSTRUCTIONS
4
Step 1 Connect the high pressure hose to the
unit’s high pressure outlet.
Step 2 Insert the spray wand of your
choice into the spray wand
extension. Push in and turn clockwise
to lock spray wand in place.
Step 3 Connect garden hose to unit’s
water inlet.
Step 4 Connect garden hose to the
cold water source and turn water on
completely.
Step 5 Plug the power cord into the power out-
let. Press “TEST”, then press “RESET” to assure
proper connection to power. Trigger the gun to
eliminate trapped air, wait for a steady flow of
water to emerge from the spray nozzle.
Step 6
Turn on (I) the pressure
washer. The motor starts only if the
trigger of the gun is pulled and shuts
off
when the trigger is released.