Filter
Top Products
Tools required: adjustable pliers.
3
ASSEMBLY INSTRUCTIONS
Step 1
Attach the handle to the frame of
the pressure washer. Align holes, insert bolt,
and tighten with knob.
Step 3
Attach the triple jet nozzle to the
spray wand.
Step 4
Attach the spray wand to the
trigger gun.
Step 2
Attach high pressure hose to
trigger gun.
Step 5
Check oil level. Oil level should be
to the oil filler neck. Be sure the machine is
level when checking the oil level. (Refer to the
engine’s operating manual for seasonal grades.)
Step 6
Fill gas tank with unleaded
gasoline. Do not use leaded gasoline.
Important!
Do not run the engine
with a high or low oil level as this can
cause engine damage. If you have fur-
ther questions regarding the engine,
please refer to the engine’s operating
manual included with the unit.