Filter
Top Products
3
ASSEMBLY INSTRUCTIONS
Step 1 Attach the handle
to the frame of the pressure
washer. Align holes, insert
bolts, and tighten with knobs.
Step 2 Attach the
gun/hose storage handle.
Step 8 Connect the
high pressure hose to the
unit’s high pressure outlet.
Step 9 Connect the
garden hose to unit’s
water inlet.
Step 7 Attach the
high pressure hose to the
spray gun.
Important!
Do not run the engine with a high or low oil level as this
can cause engine damage. If you have further questions
regarding the engine, please refer to the engine’s operat-
ing manual included with the unit.
Step 3 Attach the
wand to the spray gun.
Step 4 Attach the triple
jet nozzle to the wand.