Filter
Top Products
6 English
"
STEP 5:
Fasten the rubber grommets in the
nozzle holder.
" STEP 6:
Place the quick connect nozzles in
the nozzle holder.
" STEP 7:
Attach the wand to the spray gun.
" STEP 8:
Pull the spring-loaded collar of the
wand back to insert your choice of
quick connect nozzle.
" STEP 9:
Release the collar and push the noz-
zle until the collar clicks.
ƽ WARNING
High pressure in nozzle area.
Risk of injury caused by improperly
locked nozzle.
! Make sure you hear a ‘click’ when in-
serting the nozzle tip into the wand.
! Pull the nozzle to make sure it is
seated properly before operating
your unit.
" STEP 10:
Attach the high pressure hose to the
spray gun.