Filter
Top Products
English 7
Î STEP 6:
Unlock the trigger gun safety lock.
Trigger the gun to eliminate trapped
air, wait for a steady flow of water to
emerge from the spray nozzle.
Î STEP 7:
Slide the throttle control to the RUN
position.
Î STEP 8:
Push the primer ball three times.
Wait 3 seconds between each push.
Note: in cold weather push 5 times.
For engine details see engine manual.
Î STEP 9:
Pull the starter handle.
If the engine fails to start after
3 pulls, squeeze the trigger gun to
release pressure, and repeat step.
This nozzle features two positions. The
high setting provides a steady powerful
25° high pressure spray pattern, for
general cleaning. The low setting cre-
ates a wider 40° low presure pattern.
Note: Detergent is applied with the noz-
zle set at low pressure.
ƽ WARNING
To avoid serious injury never point
spray nozzle at yourself, other per-
sons or animals.
USING THE ACCESSORIES
High / Low pressure nozzle