Filter
Top Products
10 English
" STEP 1: Release trigger and engage
gun safety lock.
" STEP 2: Turn pressure washer to off
(O) position.
" 1: Disconnect all water connections.
" 2: Turn on the machine for a few se-
conds, until the water which had
remained in the pump exits, turn off
immediately.
" 3: Do not allow high pressure hose
to become kinked.
" 4: Store the machine and accesso-
ries in a room which does not reach
freezing temperatures. DO NOT
store near furnace or other sources
of heat as it may dry out the pump
seals.
ƽ CAUTION
Failure to follow the above directions
will result in damage to the pump as-
sembly and accessories.
Pull out the water inlet filter with flat-
nose pliers and rinse out in warm water.
The unit is maintenance-free.
TAKING A BREAK ..five minutes or more
WINTERIZING AND LONG-TERM STORAGE
CARE AND MAINTENANCE INSTRUCTIONS
Cleaning the water inlet filter Maintenance