Karcher 300 S Pressure Washer User Manual


 
English Puzzi 300 / 300 S / 400 13
Working tips
The more sensitive the carpet, the
smaller the amount of cleaning
agent
Carpets with jute backings can
shrink and the colours can bleed if
the treatment is too wet
High pile carpets should be
brushed off first
Cleaning with warm water
(up to max. 50°C) is more effective
Spray very dirty areas beforehand
Work from light to dark areas
(from window to doors)
Work from clean areas to dirty
ones
Treat carpet with Care Tex
RM 762 after cleaning
(accessory).
Wait until cleaned surface is dry
before walking on it
Use de-foaming agent
RM 761 (accessory) for
shampooed carpets.
AFTER OPERATION
Storage
! Remove unused cleaning fluids
from the housing with suction hose
! Remove the floor nozzle and hold
suction hose in a fresh-water tank.
Turn "Suction" switch on. The
cleaning fluid removed by suction
is collected in the dirty-water tank
! Empty the dirty-water tank
! Fill fresh-water tank with 5l clean
water
! Switch on spray switch
! Activate valve handle and rinse
out unit for approx. 2 min.
! Switch off unit and pull the power
plug.
CARE AND MAINTENANCE
Service agreement:
A maintenance contract for this unit
can be signed with a Kärcher
authorised dealer.
! Remove the cover
Unscrew the (1) float
Clean the (2) fluff strainer
Clean the (1) fresh water strainer
Clean the float switch (2)
(only Puzzi 400)