Jonsered HT 2124T Trimmer User Manual


 
English – 19
TECHNICAL DATA
Technical data
Note 1: Equivalent noise pressure level is calculated as the time-weighted energy total for noise pressure levels under various
working conditions with the following time distribution: 1/2 idle and 1/2 max. speed.
Technical data HT2124 HT2124T
Engine
Cylinder displacement, cu.in/cm
3
1,37/22,5 1,37/22,5
Cylinder bore, inch/mm 1,26/32,0 1,26/32,0
Stroke, inch/mm 1,10/28 1,10/28
Idle speed, rpm 3000 3000
Recommended max. speed, rpm 12000 12000
Max. engine output, acc. to ISO 8893, kW/ rpm 0,6/7000 0,6/7000
Catalytic converter muffler No No
Speed-regulated ignition system No No
Ignition system
Manufacturer/type of ignition system Ikeda Ikeda
Spark plug NGK BPMR 6Y NGK BPMR 6Y
Electrode gap, inch/mm 0,03/0,7 0,03/0,7
Fuel and lubrication system
Manufacturer/type of carburetor Walbro Walbro
Fuel tank capacity, US pint/litre 1,06/0,5 1,06/0,5
Weight
Weight without fuel, Lbs/kg 11,2/5,1 11,4/5,2
Sound levels
(see note 1)
Equivalent sound pressure level at the operator’s ear,
measured according to EN ISO 22868, dB(A):
97 95
Vibration levels
Vibration levels at handles, measured according to
EN ISO 22867, m/s
2
Idle speed, front/rear handles: 1,4/1,5 2,0/1,1
Max. speed, front/rear handles: 4,5/3,8 4,5/3,3
Blades
Type Double sided Double sided
Length, mm 550 600
Blade speed, cuts/min 3765 3765