Jonsered GR2026L/CL Brush Cutter User Manual


 
6 English
3. Cutting
attachment guard
Ensure that the spray
guard is undamaged and
is not cracked.
Replace the guard if it
has been exposed to
impact or is cracked.
Always use the prescribed
blade an guard
combination, see chapter
"Technical data".
SAFETY INSTRUCTIONS
Control, maintenance and service of
the machines safety equipment
IMPORTANT INFORMATION
All service and repairs to the machine require
special training.
This applies especially to the machines safety
equipment. If the machine does not meet any
of the controls listed below you should
contact your service workshop.
The purchase of one of our products
guarantees that professional repair and
servicing will be carried out on it. If the point
of purchase is not one of our servicing deal
ers, please ask for details of the closest
service workshop.
1. Throttle trigger
lock
Check that the throttle is
locked in the idling
position when the
throttle trigger lock is in
its original position.
Press in the throttle
trigger lock and make sure
it returns to its original
position when released.
Ensure that the throttle
and throttle trigger lock
move easily and that their
return spring systems
function.
See section "Start". Start
the machine and apply
full throttle. Release the
throttle and check that the
cutting equipment stops
and remains at a standstill.
If the cutting equipment
rotates with the throttle in
the idling position then
the carburettors idling
setting must be checked.
See chapter
“Maintenance“.
2. Stop switch
Start the engine and make
sure that the engine stops
when the stop switch is
moved to the stop
position.
4. Vibration
damping system
Check the vibration
damping element
regularly for material
cracks and distortion.
Check that the vibration
damping element is
undamaged and securely
attached.
#
5. Muffler
1.Never use a machine that
has a defective muffler.
2.Check regularly that the
muffler is secure.
3.If your muffler is fitted
with a spark arrest screen
then it should be cleaned
regularly. A blocked
screen leads to the engine
overheating with serious
damage as a result. Never
use a muffler with a
defective spark arrest
screen.