Filter
Top Products
32 – English
TECHNICAL DATA
Technical data
Note 1: Equivalent noise pressure level is calculated as the time-weighted energy total for noise pressure levels under
various working conditions with the following time distribution: 1/2 idle and 1/2 max. speed.
NOTE! Noise pressure at the user’s ear and vibration on the handles are measured with all the machine’s approved
cutting equipment fitted. The table indicates the highest and lowest values.
Technical data GR 2036 CC 2036
Engine
Cylinder displacement, cu.in/cm
3
2,21/36,3 2,45/40,2
Cylinder bore, inch/mm 1,50/38,0 1,57/40
Stroke, inch/mm 1,26/32 1,26/32
Idle speed, rpm 2700 2700
Recommended max. speed, rpm 11000-11700 11500-12500
Speed of output shaft, rpm 10000 10000
Max. engine output, acc. to ISO 8893, kW/ rpm 1,3/9000 1,3/9000
Catalytic converter muffler Ye s Ye s
Speed-regulated ignition system Ye s Ye s
Ignition system
Manufacturer/type of ignition system Walbro CD Walbro CD
Spark plug
NGK BPMR 7A/
Champion RCJ 7Y
NGK BPMR 7A/
Champion RCJ 7Y
Electrode gap, inch/mm 0,02/0,5 0,02/0,5
Fuel and lubrication system
Manufacturer/type of carburetor Walbro WT Walbro WT
Fuel tank capacity, US pint/litre 1,06/0,5 1,06/0,5
Weight
Weight without fuel, cutting attachment and guard, Lbs/kg 15,6/7,1 16,1/7,3
Sound levels
(see note 1)
Equivalent sound pressure level at the user′s ear, measured
according to ANSI B175.3-1997, dB(A), min/max:
92/101 96/99
Vibration levels
Vibration levels at handles, measured according to ANSI
B175.3-1997, m/s
2
At idle, left/right handles, min.: 1,9/2,7 3,2/2,8
At idle, left/right handles, max.: 2,7/4,3 4,0/5,0
At max. speed, left/right handles, min.: 3,3/5,0 3,5/3,0
At max. speed, left/right handles, max.: 4,5/6,2 9,0/5,7