Filter
Top Products
15
1413
16
17
13 Rear Receiver Hitch Kit
Rear receiver hitch kit bolts on the tractor rear hitch plate to provide a standard
1-1/4-in. x 1-1/4-in. receiver hitch.
X700 Series BM20877 $39.00
14 1.25 in. (38 mm) Hitch Drawbar Kit for Receiver Hitch
The drawbar kit may be used on the front or rear of tractor or used on rear extractor. Provides
a hitch hole further back than the standard hitch plate hole, and requires Rear Receiver Hitch
Kit. (Shown with PM05101 optional ball for hitch).
X700 Series BM19635 $32.00
15 Pintle Hitch Mounting Kit
Provides a bracket for installing a pintle hitch on front or rear of tractor. The pintle hook,
AM128452, must be ordered separately.
X700 Series BM20808 $48.00
16
Pintle Hook
The pintle hitch is convenient for pulling or moving equipment such as small planes and boats
that are equipped for pintle hitch use. Requires BM20808 Pintle Hitch Mounting Kit.
X700 Series AM128452 $135.00
17 Click-N-Go Brackets
Install on the rear of tractor to provide a quick and easy way to install and remove rear mount-
ed equipment, such as a rear bagger or ballast box.
X700 Series BM20714 $100.00
18 Front Light Kit
Includes two 37.5 watt lights, mounting frame, and wire harness. Attaches to the quick-hitch.
Hood will tilt forward for access to the engine.
X700 Series BM20753 $185.00
19 Roller Striping Kit
The roller kit creates a ‘’ball park’’ striping effect, enhancing the finished look of the turf. The
2-in. diameter rollers are mounted to a strong 7/8-in. steel shaft.
X700-Series with 54 inch, 62 inch, or 60 inch 7-Iron decks BM22689 $224.00
20 540 RPM Rear PTO Drive
Used to drive stationary and 3-point-hitch-mounted equipment. Three-position control lever;
mid PTO, rear PTO only, and mid and rear PTO. Dealer installation recommended.
X700 Series BM21914 $859.00
18
19
20
Vertis QCA
1300 19th Street, Suite 200
East Moline, IL 61244
Cyan
Magenta
Yellow Black
44499 Page 15