Filter
Top Products
OPERATION
11
MTF-031039C
KNOW YOUR SNOWTHROWER
READ THIS OWNER’S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR SNOWTHROWER. Compare the
illustrations with your SNOWTHROWER to familiarize yourself with the location of various controls and adjustments. Save
this manual for future reference.
Figure 7
Recoil
Starter
Handle
Auger Drive Lever
Chute Control Rod
Discharge Chute
Chute Deflector
Primer
Button
Recoil
Starter
Ignition Switch
Key
Choke Control
ENGINE AND SNOW THROWER OPERATING CONTROLS
The engine operating controls and their functions are as
follows:
Auger Drive Lever - Starts and stops the auger.
Chute Control Rod - Changes the direction of snow throw-
ing through the discharge chute.
Chute Deflector - Changes the distance the snow is
thrown.
Discharge Chute - Changes the direction the snow is
thrown.
Ignition Switch Key - Must be inserted and turned to the
ON position to start the engine.
Recoil Starter Handle - Starts the engine manually.
Electric Starter Button - (Not shown) On electric start mod-
els, use to start the engine when using the 120V electric
starter.
Choke Control - Used to start a cold engine.
Primer Button - Injects fuel directly into the carburetor
manifold for fast starts in cold weather.