Filter
Top Products
Installing - Page 14
A
C
B
C
INSTALLING
E
Quick Coupler (optional)
1) Install hitch Quick Coupler (A) on the tractor (see
tractor operator manual).
2) Stop vehicle on a level surface, not on a slope, then
moving back to the tractor until the Quick Coupler
(A) is range with the (B) and (C) hitch points.
3) Raise the Quick Coupler (A) and make sure that tiller’s
hitch is in the right position (E).
CAUTION: Before you work around hitch:
• STOP engine.
• LOCK park brake.
• FIRMLY block tiller on horizontal surface
.
Park vehicle safely
• Stop vehicle on a level surface, not on a slope.
• Disengage PTO.
• Engage the park brake.
• STOP the engine.
• Remove the key.
• Before you leave the operator’s seat, wait for engine and all moving parts to STOP.
Stay clear of rotating drivelines
Entanglement in rotating driveline can cause serious injury or death:
• Wear close fitting clothing.
• STOP the engine and be sure PTO driveline is stopped before getting near it.
D
D