Filter
Top Products
Sharpening blades
Blade sharpening is extremely important in order to get the best cutting results. Sharp
blades permit a high quality cut and also reduce HP thus lowering cost.
To sharpen blades, first remove them following the above instructions.
Place the blade in a vise and sharpen them by using a hand file or grinder. Do not
sharpen the blades to a sharp cutting edge. The cutting edge should be between
1
/
64
” to
1
/
32
” to prevent excessive pitting and dulling of the blades. Sharpen both ends of
the blade equally for balance and always maintain corners. Always keep all three
blades sharpened equally in order to maintain balance.
CAUTION: Unbalanced or warped blades can cause damage to the mower and/or
personal injury. Replace damaged blades before operating the mower. Sharpen
both ends of the mower blades equally or until the blade is balanced.
4.04 - Belt Tension
M
AINTENANCE
27 FRONTIER
G
ROOMING
M
OWER
O
PERATOR
’
S
M
ANUAL
1
2
3
Fig. 12
1. spindle
2. blade
3. blade bolt
Fig. 13
The belt deflection should be
between 5/16"-3/8".