Filter
Top Products
2. Gearbox oil level: Check gearboxes’ oil level, it should be between ½ and
2
/
3
full. If
needed add either
SAE 90 wt. or SAE 140 wt. gear oil.
Every 25 hours:
Check hardware tightness; mower vibration can loosen bolts
17
. Check tightness of the
hardware periodically, using Table 1 as a guide.
Every 50 hours:
1. Lubricate the nine spindles with two or three shots of multipurpose grease (see fig.
17). The top grease fittings are easily accessible from the top of the deck by simply
removing the plastic dust guards.
MAINTENANCE 33 FRONTIER
F
LEX WING GROOMING MOWERS OPERATOR’S MANUAL
17
Table 1 gives the correct torque values for various bolts and nuts, page 42.
Fig. 15
Grease points on
Flex frame.