John Deere 444k Compact Loader User Manual


 
Dimensions and SpeciƟcations with
Hi-Vis Coupler and Construction Forks
524K Z-BAR / HIGH-LIFT
524K Z-BAR AND HIGH-LIFT LOADERS WITH QUICK-COUPLER AND HOOK-ON CONSTRUCTION FORKS
Z-Bar Z-Bar High-Lift High-Lift
Dimensions with Forks 1.22-m (48 in.) tine length 1.52-m (60 in.) tine length 1.22-m (48 in.) tine length 1.52-m (60 in.) tine length
A Height to Top of Cab and Canopy 3.25 m (10 ft. 8 in.) 3.25 m (10 ft. 8 in.) 3.25 m (10 ft. 8 in.) 3.25 m (10 ft. 8 in.)
B Hood Height 2.30 m (7 ft. 7 in.) 2.30 m (7 ft. 7 in.) 2.30 m (7 ft. 7 in.) 2.30 m (7 ft. 7 in.)
C Ground Clearance 400 mm (15.7 in.) 400 mm (15.7 in.) 400 mm (15.7 in.) 400 mm (15.7 in.)
D Length from Centerline to Front Axle 1.45 m (4 ft. 9 in.) 1.45 m (4 ft. 9 in.) 1.45 m (4 ft. 9 in.) 1.45 m (4 ft. 9 in.)
E Wheelbase 2.93 m (9 ft. 7 in.) 2.93 m (9 ft. 7 in.) 2.93 m (9 ft. 7 in.) 2.93 m (9 ft. 7 in.)
F Overall Length, Forks on Ground 7.88 m (25 ft. 10 in.) 8.18 m (26 ft. 10 in.) 8.21 m (26 ft. 11 in.) 8.51 m (27 ft. 11 in.)
G Height to Hinge Pin, Fully Raised 3.77 m (12 ft. 5 in.) 3.77 m (12 ft. 5 in.) 4.12 m (13 ft. 6 in.) 4.12 m (13 ft. 6 in.)
H Reach, Fully Raised 0.80 m (31.3 in.) 0.80 m (31.3 in.) 0.81 m (31.9 in.) 0.81 m (31.9 in.)
I Fork Height, Fully Raised 3.55 m (11 ft. 8 in.) 3.55 m (11 ft. 8 in.) 3.90 m (12 ft. 9 in.) 3.90 m (12 ft. 9 in.)
J Maximum Reach, Fork Level 1.54 m (5 ft. 1 in.) 1.54 m (5 ft. 1 in.) 1.80 m (5 ft. 11 in.) 1.80 m (5 ft. 11 in.)
K Fork Height, Maximum Reach 1.72 m (5 ft. 8 in.) 1.72 m (5 ft. 8 in.) 1.72 m (5 ft. 8 in.) 1.72 m (5 ft. 8 in.)
L Reach, Ground Level 0.94 m (3 ft. 1 in.) 0.94 m (3 ft. 1 in.) 1.27 m (4 ft. 2 in.) 1.27 m (4 ft. 2 in.)
M Depth Below Ground 16 mm (0.6 in.) 16 mm (0.6 in.) 95 mm (3.7 in.) 95 mm (3.7 in.)
N Tine Length 1.22 m (48 in.) 1.52 m (60 in.) 1.22 m (48 in.) 1.52 m (60 in.)
O Load Position, 50% Tine Length 0.61 m (24 in.) 0.76 m (30 in.) 0.61 m (24 in.) 0.76 m (30 in.)
SpeciƟcations with Forks
Tipping Load, Straight 7126 kg (15,709 lb.) 6723 kg (14,822 lb.) 6654 kg (14,669 lb.) 6602 kg (14,554 lb.)
Tipping Load, 40-deg. Turn 6192 kg (13,651 lb.) 5836 kg (12,867 lb.) 5757 kg (12,692 lb.) 5705 kg (12,578 lb.)
Rated Operating Load, 50% Full-Turn
Tipping Load (conforms to ISO 14397-1
and SAE J1197)*
3096 kg (6,826 lb.) 2918 kg (6,433 lb.) 2879 kg (6,346 lb.) 2853 kg (6,289 lb.)
Rated Operating Load, Rough Terrain,
60% Full-Turn Tipping Load (conforms
to EN474-3)*
3715 kg (8,191 lb.) 3502 kg (7,720 lb.) 3454 kg (7,615 lb.) 3423 kg (7,546 lb.)
Rated Operating Load, Firm and Level
Ground, 80% Full-Turn Tipping Load
(conforms to EN474-3)*
4954 kg (10,921 lb.) 4669 kg (10,293 lb.) 4606 kg (10,154 lb.) 4564 kg (10,062 lb.)
Operating Weight 12 511 kg (27,581 lb.) 12 554 kg (27,676 lb.) 12 675 kg (27,943 lb.) 12 718 kg (28,038 lb.)
Loader operating information is based on machine with identiƟed linkage and standard equipment, PowerTech PVX 6068 (EPA Interim Tier 4/EU Stage IIIB) engine, ROPS
cab, rear cast bumper/counterweight, transmission side-frame guards, bottom guards, standard tires, full fuel tank, and 79-kg (175 lb.) operator. This information is
affected by changes in tires, ballast, and different attachments, and assumes no tire deƠection per the standard ISO 14397-1 section 5.
*Rated operating capacity based on Deere attachments only.
E
F
CD
A
Cab and
Canopy
B
N
K
M
I
G
L
J
H
O