Filter
Top Products
210C BACKHOE LOADER SPECIFICATIONS
2'
Specifications and design subject to change without notice. Wherever applicable, specifications are in accordance with SAE Standards. Except where otherwise noted, these specifications
are based on a unit with 14.9-24, 6 PR, R4 rear tires; 7.50-16, 10 PR, F3 front tires, 0.88 cu. yd. (0.67 m') loader bucket, 24-in. (610 mm) standard-duty backhoe bucket, RaPS/FOPS, full fuel
tank, 175 lb. (80 kg) operator and standard equipment.
Rated Power @ 2200 rpm: SAE
Net .,.., 55hp(41 kW)
GrosS 58hp(43kW)
Net engine power is with standard equipment including air cleaner, exhaust system,
alternator, and cooling fan, at standard conditions per SAE J1349 and DIN 70020, using
No. 2-D fuel @ 35 API gravity. No derating is required up to 6000 feet (1800 m) altitude.
Gross power is without cooling fan.
DIN 70 020
43kW
Engine: John Deere 4-239D
Type. . . . . . . . . . . . . . . . 4-stroke cycle, naturally aspirated diesel
Bore and stroke. . . . . . . . . . . . . . 4.19 x 4.33 in. (106.5x 110mm)
No.of cylinders 4
Displacement 239cu.in.(3.917L)
Maximumnettorque@ 1200rpm .158 Ib-ft(214Nm)(21.8kg-m)
20 percent torque rise
Cooling fan Suction
Compression ratio 17.8t01
Lubrication. . . . . . . . Pressure system w/full-flow filter and cooler
Mainbearings 5
Aircleaner Dry
Electricalsystem 12volt
Alternator 51amps
Torque Converter:
Single stage, dual phase, overrunning stator, 11-in. (280 mm)
diameter, stall torque ratio 2.78:1
Reverser:
Modulated, full-power shift with multiple wet-disk clutches. Re-
verser operating lever at left of steering wheel.
Transmission:
Manual shift with first and second speeds having sliding collar
engagement and third and fourth speeds engaged with cone-type
synchronizers. Single shift lever,floor mounted.
Forward Reverse
Gear mph (km/h) mph (km/h)
1 3.3 5.3 3.2 5.2
2 5.6 9.0 5.5 8.9
3 12.0 19.3 11.9 19.2
4 21.9 35.2 21.8 35.1
1 5.4 8.7 5.3 8.5
2 5.7 9.2 5.6 9.0
3 12.3 19.8 12.2 19.6
4 22.4 36.1 22.3 35.9
FinalDrives Planetary,inboard
Service Brakes: Hydraulic, applied with separate pedals; hydrauli-
cally equalized when both pedals are depressed. Wet disks and
facings are fully enclosed and self-adjusting.
Travel Speeds:
With standard 14.9-24
rear and 7.50-16
front tires
With MFWD and 16.9-24
(required) rear and 12.00-
16.5 front tires
Secondary Brake: Mechanical "V" groove band located on differ-
ential ring gear
Steering: Hydrostatic power
Steering axle, regular:
Turning radius (brake applied) 9 ft. 4 in. (8.59 m)
Clearance circle (brake applied) . . . . . . . . . . 27 ft. 4 in. (8.33 m)
Steeringwheelturns,lefttoright 2.2
righttoleft 2.9
Axleoscillationstoptostop 22deg.
Mechanical front-wheel drive (engaged):
Turning radius(brake applied) 10 ft. (3.05 m)
Clearance circle (brake applied) .. . ... . .. . .. . .29 ft. (8.84 m)
Steeringwheelturns,lefttoright 2.3
righttoleft 2.8
Axl~oscillationstoptostop 22deQ.
Hydraulic System: Open-center
Pressure, main relief. . . . . . 2500 psi (17238 kPa)(175.8 kg/em')
Pump Geartype
Flow@2200rpm 24gpm(1.51 Us)
Filter, return oil. . . 10micron, steel-enclosed replaceable element
50
'.
Front
7.50-16, 10 PR, F3
11L-15, 8 PR, 1-1A
MFWD . . . . . . . . . . . 12.00-16.5,8 PR, R4
Rear
14.9-24,6 PR, R4
16.9-24, 6 PR, R3
17.5L-24, 8 PR, R4
16.9-24,8 PR, R4
Tires:
Wheel Treads:
Front 56in.(1420mm)
Rear 60in.(1525mm)
MFWD-Front 68in.(1730mm)
-Rear 62in.(1575mm)
Wheelbase 82.7in.(2100mm)
w/MFWD 83.3in.(2116mm)
Axle Ratings: Static Rating Dynamic Rating
Front. . . . . . . . . . .. 36,300 lb. 36,300 lb.
(16 500 kg) (16 500 kg)
Rear 41,100 lb. 54,800 lb.
(18 700 kg) (24 900 kg)
Capacities: U.S.
Fuel tank 23gal.
Enginecoolant 17qt.
Engineoilincludingfilter 9qt.
Torque converter and reverser system. . . . . . .. 8 qt.
Hydraulicsystem 16gal.
SAE J43
8700 lb.
(4000 kg)
11,500lb.
(5300 kg)
Liters
87
16
8.5
7
60
Additional Standard Equipment:
Air cleaner restriction indicator Monitor for:
Air cleaner, dry type w/safety Alternator
element and built-in, internal, Engine coolant temperature
self-cleaning precleaner Engine oil pressure
Alternator, 51-ampw/ Hydraulic filter
transistorized voltage Parking brake
regulator Torque converter
Antifreeze to -34°F (-37°G) temperature
Backhoe boom transport lock Muffler, above hood w/vertical
Battery, 110-minutereserve exhaust and deflector
capacity Multiple fuse protected
Differential lock electrical system-12 volt
Electric fuel shutoff Oil-to-air cooler for hydraulic
Emergency/parking brake system
Engine side shields Oil-to-air cooler for reverser/
Fixed position stabilizer feet torque converter system
Foot and hand throttles Rear fenders
Fuel gauge Rear reflectors
Fuel tank sump w/easy access RaPS/FOPS canopy, isolation
drain mounted, with roof and seat
Hourmeter belt
Hydraulic self-leveling loader Steps and handholds
Hydrostatic power steering Swivel vinyl seat, fully
Key start switch adjustable
Lights: Torqueconverter
Halogen driving/working Vandal protection w/built-in
lights locks
Taillight
Loader bucket level indicator
SAE Operating Weight. . . . . . . . . . . . . . . . . 10,500 lb. (4723 kg)
Hydraulic Cylinders:
Bore
Stroke Rod
In.
(mm)
In.
(mm)
In.
(mm)
Loader boom (2) .....
2.76
70
30.8 782 1.77
45
Loader bucket (1) ....
2.76 70 28.1
715 1.75 40
Backhoe boom (1) . . ..
3.94
100 34.9 886 1.97
50
Backhoe crowd (1) ...
3.54 90 33.0
838
1.77
45
Backhoe bucket (1) . ..
3.15 80
31.0
788
1.77 45
Backhoe swing (2) ...
3.15 80
27.4
226
1.77
45
Backhoe extendable
dipper(1)...........
2.50
64
48.0
1220 1.25
32
Backhoe stabilizers (2)
3.54 90 15.5
394
1.77
45
Steering (1) regular
axle...............
2.00 51 9.5
241
1.00
25
Steering (1) MFWD . ..
2.00 51 12.6 320
1.00 25