Filter
Top Products
MODEL 06621213 - 16 JOHN DEERE 717 & 727 PECO 9
PECO
ASSEMBLY
STEP 8:
STEP 9:
TIGHTEN THE HOSE CLAMPS BEFORE EACH USE!
Place the hose clamps over each end of the 6” hose (A). Attach one end of the hose onto the blower hous-
i ing (B). Attach the free end of the hose over the inlet (C). Tighten the hose clamps. Use the picture below
f for more detail.
Place the hose clamps over each end of the lower hose (D). Attach one end of the hose over the blower
cone (E). Slide the free end of the hose over the boot (F) and tighten the hose clamps. Use the picture
below for more detail.
A
B
C
D
E
F