Filter
Top Products
© Jacuzzi Luxury Bath • 14525 Monte Vista Ave • Chino • California • 91710 • www.jacuzzi.com
#GV64000 02/09
1.
• Place Ring upside down to identify the dimples as shown
in Fig. 1.
• Locate the Ring and Hanger brackets and place them as
shown in Fig. 2.
• Using a Philips Screw driver, attatch the ring and hanger
bracket to the Ring using the provided philips screws.
2.
• Once all the Ring and hanger brackets have been installed, careful-
ly flip the ring over and install onto the freestanding skirt as shown
in Fig. 4. Continue onto installing your Freestanding Bath Tub.
Ring Installation:
Ring Bracket / Ring Hanger Bracket
Fig. 2
Ring Installtion Detail
Fig. 3
Ring and Leg Bracket Location Detail
Fig. 1
3. FOR ADDITIONAL SAFETY.
• After the Ring and Bath has been installed, Place a
bead of clear silicon between the Ring and Tub rim as
shown in Fig. 4.
Silicon Installation Detail
Fig. 4