Filter
Top Products
Cetra® 532 Pure Air® II Bath
Model: EB30
Installation Notes
Refer to installation instructions included with fi xture before beginning installation.
Please confi rm product availability and specifi cations before commencing with any
installation work.
PRODUCT SPECIFICATIONS AND AVAILABILITY ARE SUBJECT TO CHANGE
WITHOUT NOTICE.
Ordering Information
Product Code:
EB30 Cetra® 532 Pure Air® II Bath
Left Hand
• Left hand Drain Location
• Accessories / Hardware:
Trip-Lever Drain Kit: #X559
Rotary Drain Kit, 26” Cable: #8730
• Trim Kit Finishes Available:
(827) – Chrome
(898) – Brushed Chrome
(815) – Satin Nickel
(829) – Bright Brass
(805) – Platinum
(826) – Brushed Nickel
(845) – Oil Rubbed Bronze
Technical Specifi cations
Dimensions
60” L x 31-7/8” W x 21-1/4” H
(1524 mm) L x (791 mm) W x (553 mm) H
Drain/Overfl ow
A: 18-1/2” (470 mm) B: 9” (229 mm)
Cutout
58” x 30-1/4”
(1473 mm x 768.4 mm)
Total Weight
771 lb (350 kg) / 58 lb/ft
2
(283 kg/m
2
)
Operating Gallonage
52 U.S. Gal. (178 Liters)
Min. 47 U.S. Gal. (178 Liters)
Max. 57 U.S. Gal. (216 Liters)
Product Weight
98 lb (44 kg)
Skirt Mounting
Optional U-Frame
Electrical Specifi cations
Requires a dedicated GFCI protected separate circuit.
Blower: 120 VAC, 15 AMP, 60 Hz.
Heater
No water heater is available on this unit. Blower has integral air heater.
9"
*60"
31-7/8"
15-7/8"
12" x 4"
Blower
2"
5-3/4"
12" H x 18" L
Service Access
Opt. Service Access
© 2006 Jacuzzi Whirlpool Bath • 14880 Monte Vista Avenue • Chino • CA • 91710 • www.jacuzzi.com
CETRA® 532, LEFT HAND AIR BATH
END VIEW
21-1/4"
31-7/8"
SIDE VIEW
60"
2"
(51 mm)
(Blower)
#FR04 06/07
DRAIN/OVERFLOW
A
B
Product Shown: Cetra® 532 Pure Air® II Bath Left Hand Model: EB30
* Measurements inside unit represent cutout in fl oor to allow for drain/overfl ow.
Minimum Service Access dimensions given.