Filter
Top Products
19
5.7.2. One Star Align
From the main menu, select “Align”. Select
“One Star Align” and press ENTER. A list of
align stars that are above the horizon is
computed based on your local time and
location. Use ▲ or ▼ button to select an
alignment star and press ENTER. Center
the object in your eyepiece using ◄ ► ▲ or
▼ key. Press SPEED button to adjust the
slew speed. Then press ENTER to
complete the alignment. Or press the BACK
key to cancel the process.
If you have a very good initial setup, one
star alignment should be sufficient for good
GOTO accuracy. To increase the accuracy
you may choose to do two star alignment.
5.7.3. Two Star Alignment
Two star alignment will increase the GOTO
accuracy of the mount. It is suggested to do
two star alignment after one star alignment.
Select “Two Star Align” in the Align menu.
Use ▲ or ▼ button to select a star and
press ENTER. The mount will slew to it
automatically. Use ◄ ► ▲ or ▼ key to
center the object in your eyepiece. Press
SPEED button to adjust the slew speed if
needed. Then press ENTER to complete
the alignment. After you finish the first star,
the system will prompt you to choose the
second star. Repeat the process to finish
the second star alignment. An “Align OK!”
screen will show briefly. To obtain a better
alignment effect, it is suggested to choose
two align stars far apart.
“Two Star Align” result will be overridden if
“One Star Align” or “Sync. to Target” is
performed after “Two Star Align.”
5.8. User Object List
Besides various star lists available in the
hand controller, users can add, edit or
delete their own defined objects. The
comets and asteroids list also can be
edited. Up to 128 user objects can be added
or modified. For comets or asteroids, the
maximum number is 64, which includes the
preloaded objects.
To edit a user object, press MENU, use ▲
or ▼ button move the cursor to “User
Object List” and press ENTER. A following
screen will show:
Use ▲ or ▼ button to select R.A. and
DEC., comets or asteroids.
5.8.1. R.A. and DEC.
Select “R.A. and DEC.” and press ENTER,
a menu like following will show:
Add a new object:
Use ▼ or ▲ button to move the cursor to
“Add a new object” line, and press ENTER.
Enter the name of your object by using ▲
or ▼ key to change the display from 1 to 9,
space, - and A to Z, and ◄ or ► key to
move the cursor. Press ENTER when you
are done. A screen will display to ask you to
enter R.A. and DEC. numbers:
Enter R.A. DEC
RA: 00h00.0m
DEC: +00d00.0m
Add a new object
Edit one data
Delete one data
Delete all
R.A. and DEC.
Comets
Asteroids