iOptron 8503 Telescope User Manual


 
20
position and or key change the
number and press ENTER to select the
object you want to edit.
Follow the same procedure as “Add a new
comet” to edit it.
Delete one comet
Use or button to move the cursor to
“Delete one comet” line, and press ENTER.
A screen consists comet information will
show:
Use or button to move the cursor, and
or button to change the number. Press
ENTER to delete selected object.
Reset all comets
Use or button to move the cursor to
“Reset all comets” line, and press ENTER to
restore all deleted or modified comets data
to factory default setting.
5.7.3. Asteroids
Select “Asteroids” and press ENTER, a
menu like following will show:
Refer to 5.7.2 Comets to set the Asteroids.
5.8. Watch List
A watch list is a list of your favorite celestial
objects in the database. User can add,
delete and browse the watch list. All
celestial objects, include User objects, can
be compiled into the list. Up to 20 objects
can be added to the watch list.
To setup/modify a Watch List, press MENU,
use or button move the cursor to
“Watch List” and press ENTER. A following
screen will show:
Select “Add a watch object” and press
ENTER. Browse the celestial object list and
select the one you want to watch by press
ENTER. Follow the screen prompt to
confirm the selection. After you are done,
press BACK to back to Watch List menu.
You also can delete one or all objects in
your watching list. After the watch list is set,
it can be observed through “Select and
Slew” operation, either watching them
manually or automatically using Watch List
Auto.
5.9. Set Telescope Coord.
Set the current Altitude and Azimuth of your
telescope.
5.10. Park Scope
Park your telescope. Return the telescope
to its initial position, i.e.,its altitude is 90º0.0’
and azimuth is 180º0.0’.
Add a watch object
Delete one data
Delete all
Browse the list
Add a new asteroid
Edit one asteroid
Delete one asteroid
Reset asteroids data
No: 17 X
Name: 2P
R: 23h 3.5m D: 0º34.8’
A-44º44.5’ Z 21º56.9’