SECTION 3—OPERATION
Part No 1150695 27 Recessed Side Entry Bath Tubs
FIGURE 3.4 Filling Tub
Hydromassage
CAUTION
Before starting hydromassage, water level MUST be completely above whirlpool
jets otherwise damage to the motor/pump will result.
NOTE:Forthisprocedure,refertoFIGURE 3.5.
1. Closetheaeratorbyrotatingtheaeratorvalvetwoturnsclockwise.
2. Openthewhirlpoolinletbypushingtheinletplugin.
3. Openallwhirlpooljetsbypullingthecenterofthewhirlpooljetoutorrotatingthe
centercounterclockwise.
4. Fillthetub.RefertoFillingTubonpage 26.
5. Afterwaterlevelcoverswhirlpooljets(Detail“A ”) andafterbathingtheresident,add
ICCGDefoamertobathwater .RefertoDefoamerbottlefordirections.
6. PushwhirlpoolOn/Offbutton(Detail“B”)tostartwhirlpooljets.
7. Adjustthewhirlpoolaeratorfordesiredwateragitationbyrotatingthewhirlpool
aerator(Detail“C”).
8. Afteruse,pushwhirlpoolOn/Offbuttontostopwhirlpooljets(Detail“B”).
9. Draintub(Detail“A”).
Jets
Drain
Drain Plug
DETAIL “A” DETAIL “B”
Water Temperature Valve
Flow Water
Thermometer
DETAIL “C”