Filter
Top Products
Leveler Instructions 2 Part No 1171786
3. Remove the drawer.
4. Insert a flathead screwdriver to make contact with the leveler head.
5. Perform one of the following:
• Turn leveler screws clockwise to raise unit.
• Turn leveler screws counter clockwise to lower unit.
6. Reinstall drawer.
FIGURE 1 Usage
Armoire/Wardrobe With No Drawers
1. Open the door(s) and locate two plastic plugs at each side of the bottom shelf.
2. Pry out the plugs with a flat screwdriver.
3. Insert the flat screwdriver into the holes to make contact with the leveler head.
4. Perform one of the following:
• Turn levelator screws clockwise to raise unit.
• Turn levelator screws counter clockwise to lower unit.
5. Replace plastic plugs.
Leveler adjustment holes are located at each side of the bottom shelf.
When performing step 5, ensure that both levelers are raised/lowered to the same
height to ensure the door will open and close properly.
For this procedure, refer to FIGURE 1.
When performing step 4, ensure that both levelers are raised/lowered to the same
height to ensure the door will open and close properly.
Bottom Shelf
Leveler
Adjustment
Hole
Leveler
Adjustment
Hole
Leveler
Leveler