15. Adjusttheinjectorbyperformingoneofthefollowing:
• BottomofFloatingBallReadsGreaterThan35‐Lessdisinfectantneedstobeaddedtothemixture.Loosenthescrew
ontheinjectortodrawlessdisinfectantintothesolution.
• BottomofFloatingBallReadsLessThan35‐Moredisinfectantneedstobe
addedtothemixture.Tightenthescrew
ontheinjectortodrawmoredisinfectantintothe solution.
16. Whenthebottomofthefloatingballisnear35,turntheblackadjustmentknobontheflowmeteruntilthebottomof
thefloatingballisat35.
17. Placethebucket/pailunderthe
burpfittingtocollectthedisinfectant.Useafunnelifnecessary.
18. Notethenumberofouncesinthegraduatedplasticbottle.
19. Letthebucket/pailfilltoonegallon.
20. Turnthedisinfectantvalvetotheoffposition.
21. Removethedisinfectantdrawtubefromtheplasticbottle.
22. Examinetheamountofdisinfectantremaininginthe
plasticbottle.
23. SubtracttheamountofdisinfectantremainingfromtheamountnotedinSTEP18.
24. Performoneofthefollowing:
•Approximately½‐ounceofdisinfectanthasbeenused‐ProceedtoSTEP23.
•Muchmoreormuchlessthan½‐ounceofdisinfectanthasbeenused‐RepeatSTEPS1‐18.
25. Positionthe
disinfectantdrawtubeintothedisinfectantsolution.
26. Disinfectthetub.Refertothetubowner’smanualortotheClosedLoopDisinfectingProcedureinstructionsheet,part
number1154273.
FIGURE 1 Calibrating the Disinfectant Flowmeter
Service Access
Cabinet
Floating
Ball
Adjustment
Knob
Flow
Meter
Disinfectant Valve
DETAIL “A” -
FLOW METER
Screw
Injector
Disinfectant Siphon Tube
Invacare Continuing Care Group
www.invacare-ccg.com
USA
One Invacare Way
Elyria, Ohio USA
44036-2125
Canada
994 Hargrieve Rd.
London Ontario
N6E IP5 Canada
All rights reserved. Trademarks are identified by the symbols ™ and ®. All
trademarks are owned by or licensed to Invacare Corporation unless
otherwise noted.
Betadine is a registered trademark of Purdue Pharma L.P.
© 2008 Invacare Corporation
Part No 1154272
For Customer Service call: 800-668-2337 Rev A - 04/08