Husqvarna Z 42" Lawn Mower User Manual


  Open as PDF
of 17
 
9
ASSEMBLY
Cover Assembly
Frame
Bracket
Placethecoverassemblyupsidedownonaat1.
surface.
Place the inlet in the cover and direct it out of the 2.
large hole on the front side of the cover. Set the
inlet so that the opening will be facing into the
containers and the inlet hood is upwards.
To attach inlet, place one washer on each of the six 3.
bolts(¼x¾).Placetheboltandwasherthrough
the inlet hole.
Secureonoutsideofhoodwithanotheratwasher4.
and a nyloc nut.
3
INSTALL HOOD INLET
Inlet with opening
downwards
4
MOUNTING COVER ASSEMBLY
TO SUPPORT ASSEMBLY
Hanger
For ease of assembly, you may wish assistance from
another person for mounting the cover assembly to
mower.
Position cover assembly on the ground behind the 1.
mower.
Liftandrotatecovertoaligntheframebracketwith2.
the hanger and slide the cover down until secure.
Outside Cover
Inside Cover
 previous next