Filter
Top Products
LUBRICATION
54-English
Checking the oil level
Check the oil level in the engine when the
machine is standing level and the engine is
stopped.
Remove the dipstick, wipe it clean, and then
replace it.
The dipstick should be screwed into place.
Take the dipstick out again and read the oil
level.
The oil level shall lie between the markings
on the dipstick. If the level is approaching the
”ADD” mark, top up the oil to the ”FULL” mark
on the dipstick.
Never fill above the ”FULL” mark.
The oil is filled through the hole for the
dipstick.
API class SF, SG, SH, SJ or higher must be
used
Syntetic oil SAE 5W-30 or 10W30 is
recommended at all temperatures.
Mineral oil SAE 5W-30, 10W30 can be used
between 0 ˚F/-18 ˚C and 40 ˚F/+5 ˚C. At
temperature above 40 ˚F/+5 ˚C single grade
SAE 30 must be used.
The engine holds 1.5 quarts gallon (1.4 liters)
of oil excluding the filter; including the filter
1.6 quarts gallon (1.5 liters).
8011-500
Remove the dipstick
8009-159
The dipstick markings