Filter
Top Products
38 – English
MAINTENANCE
Bar and chain combinations
The following combinations are CE approved.
Saw chain filing and file gauges
EC-declaration of conformity
(Applies to Europe only)
Husqvarna AB
, SE-561 82 Huskvarna, Sweden, tel +46-36-146500, declares under sole responsibility that the chain
saw
Husqvarna T435
from 2009’s serial numbers and onwards (the year is clearly stated in plain text on the type plate
with subsequent serial number), is in conformity with the requirements of the COUNCIL’S DIRECTIVES:
- of June 22, 1998 ”relating to machinery”
98/37/EC
, annex IIA.
- of December 15, 2004 ”relating to electromagnetic compatibility”
2004/108/EC
.
- of May 8, 2000 ”relating to the noise emissions in the environment”
2000/14/EC
.
For information relating to noise emissions, see the chapter Technical data. The following standards have been applied:
CISPR 12:2001, EN ISO 11681-2.
Notified body:
0404, SMP Svensk Maskinprovning AB
, Fyrisborgsgatan 3, SE-754 50 Uppsala, Sweden, has carried
out EC type examination in accordance with the machinery directive’s (98/37/EC) article 8, point 2c. The certificates for
EC type examination in accordance with annex VI, have the numbers:
404/08/1276
In addition, SMP, Svensk Maskinprovning AB, Fyrisborgsgatan 3, SE-754 50 Uppsala, Sweden, has certified conformity
with annex V of the Council’s Directive of May 8, 2000 ”relating to the noise emissions in the environment” 2000/14/EC.
The certificates have the numbers:
01/161/080
The supplied chain saw conforms to the example that underwent EC type examination.
Huskvarna January 9, 2009
Bengt Frögelius, Development director chainsaw R&D
Bar Chain
Length, inch Pitch, inch Gauge, mm Max. nose radius Type Length, drive links (no.)
12 3/8 0,050 7 T
Husqvarna H36
45
14 3/8 0,050 7T 52
16 3/8 0,050 7T 56