Filter
Top Products
TECHNICAL DATA
47
(1
The power rating of the engines
indicated is the average net power
output (at specified rpm) of a typical
production engine for the engine
model measured to SAE standard
J1349/ISO1585. Mass production
engines may differ from this value.
Actual power output for the engine
installed in the final machine will
depend on the operating speed,
environmental conditions and other
variables.
(2
For engine specifications, refer to
the engine manufacturer’s owner’s
manual.
966809001, 966582201
Engine
Manufacturer Briggs & Stratton
Type Endurance
Power 19.5 hp
(1, 2
Lubrication Pressure with oil filter
Fuel Min 86 octane unleaded (Max-
ethanol 5%, Max MTBE 15%)
Fuel tank capacity 3 gallons / 11.3 liters
Cooling Air cooled
Air filter Standard
Alternator 12V / 16A
Starter Electric 12V
Transmission
Transmission EZT Hydro Gear
Speed and direction controls Dual levers, foam gripped
Speed forward 6.5 mph / 10.5 km/h
Speed reverse 3.3 mph / 5.3 km/h
Brakes Mechanical parking brake
Front caster tires, smooth tread 410-5 4 ply
Rear tires, turf pneumatic 18 x 7.5-8
Tire pressure 15 PSI / 103 kPa / 1 bar
Equipment
Cutting width 42"
Cutting height 1½" - 4" / 2.5 cm - 10.6 cm
Number of blades 2
Blade length 21" / 53 cm
Sprung seat Standard
Blade engagement Manual
Deck construction Stamped
Productivity
Output 2.2 acres/hr / 8,903 m
2
/hr
Overall dimensions
Weight 430 lbs / 195 kg
Base machine length 75" / 191 cm
Base machine width 40" 102 cm
Base machine height 43¾" / 112 cm
Overall width, chute up 43" / 109 cm
Overall width, chute down 58" / 147cm